Parametric simulation

From Charm-Tau Detector
Revision as of 12:30, 19 November 2021 by Razuvaev (Talk | contribs)

Jump to: navigation, search

The new parametric simulation package is described here.

Contents

Talks

SctParSim (WIP)

A parametric simulation is a tool to receive a detector response without detailed description of interaction of particles with matter.

Implemented detector subsystems:

  • drift chamber
  • FARICH PID system
  • calorimeter
  • muon system

The parametric simulation yields the detector response in the SCT EDM format thus allowing to analyze its result in the same manner as the result of the full simulation.

Detector configuration

The detector parameters can be changed in the run script (see Configuration section). The detector parameters and their default values can be viewed here.

SctParSimAlg

Name to change parameter Description Default value
B Detector magnetic field 1.5
mostProbMass The mass of most probable particle 0.13957

TrackSystemTool

Name to change paramater Description Default value
trackRhoMin Inner radius of barrel tracker, m 0.1
trackRhoMax Outer radius of barrel tracker, m 0.8
trackZMin Inner z coordinate of endcup tracker, m 0
trackZMax Outer z coordinate of endcup tracker, m 1
trackMinPt Minimum momentum, GeV 0.05
trackPtProb Registration probabilities for different momentum, {GeV, prob} {{0.1, 0.8}, {0.3, 0.9}, {1, 0.95), {10, 0.99}}
trackRadLen Radiation length in the track system, m 187
trackResParPT Parameterizaton parameters for xy projection 0.00212
trackResParPZ Parameterization parameters for z projection {0.001281, 0.00308}
trackLayerAx The radius of layers anf the location radius of the anod layers, mm {{6.306, 217.306}, {6.644, 227.1}, {7.165, 246.906}, {6.564, 341.938}, {6.794, 352.06}, {7.14, 371.992}, {7.388, 382.95}, {6.651, 467.57}, {6.823, 477.718}, {6.968, 488.097}, {7.12, 498.701}, {7.274, 509.535}, {6.768, 636.322}, {6.898, 646.501}, {7.007, 656.957}, {7.121, 667.581}, {6.791, 750.730}, {6.902, 761.027}, {6.995, 771.472}, {7.091, 782.061}}
trackLayerSt The radius of layers and the location radius of the stereo layers, mm {{6.473, 280.136}, {6.747, 290.136}, {7.182, 310.863}, {7.486, 321.938}, {6.603, 405.941}, {6.799, 416.04}, {7.104, 436.741}, {7.314, 447.606}, {6.741, 533.35}, {6.859, 543.615}, {7.026, 554.088, {7.161, 564.762}, {6.778, 584.801}, {6.919, 595.108}, {7.039, 605.606}, {7.163, 6169.289}, {6.746, 689.948}, {6.865, 700.185}, {7.041, 720.09}, {7.165, 730.775}}

FARICHSystemTool

Name to change paramater Description Default value
farichRhoMin Inner radius of barrel FARICH system, m 0.82
farichRhoMax Outer radius of barrel FARICH system, m 0.9
farichZMin Inner z coordinate of endcup FARICH system, m 1.02
farichZMax Outer z coordinate of encup FARICH system, m 1.273
farichHoleR Hole radius of FARICH system 0.3
parSimFarichFileName The path to the file with response histograms of FARICH ./pi_ms_f1_mppc2_px3_d200_mla4_graph2d.root

CaloSystemTool

Name to change paramater Description Default value
caloRhoMin Inner radius of barrel calorimeter, m 1.09
caloRhoMax Outer radius of barrel calorimeter, m 1.55
caloZMin Inner z coordinate of endcup calorimeter, m 1.293
caloZMax Outer z coordinate of endcup calorimeter, m 1.86
caloCosthmax Maximum cosine 0.9
caloClSize Calorimeter cluster size, m 0.045
caloClSizeEGamma Calorimeter cluster size for gamma, m 0.15
caloEMinBarrel Minimal energy, GeV 0.015
caloEMinEndcup Minimal energy, GeV 0.015
caloResPar Parameterization parameters {1.34e-2, 0.066e-2, 0.0, 0.82e-2}

MuonSystemTool

Name to change paramater Description Default value
muonRhoMin Inner radius of barrel muon system, m 1.87
muonRhoMax Outer radius of barrel muon system, m 2.15
muonZMin Inner z coordinate of endcup muon system, m 1.88
muonZMax Outer z coordinate of endcup muon system, m 2.16
parSimMuonFileNameMu The path to the file with response histograms of muon system (muon) ./g4beamline_mu_plus_100k_parse.root
parSimMuonFileNamePi The path to the file with response histograms of muon system (pion) ./g4beamline_pi_plus_100k_parse.root


Parameterization (WIP)

Drift chamber (WIP)

The track resolution is described here.

The parametric simulation has two options in the tracker to the particle identification: an ionisation clusters counting (dNcl/dx) and dE/dx. The model of calculation the specific number of ionization clusters is taken from a TraPID option by F. Gracagnolo (The presentation on "Joint Workshop on Future tau-charm factory" in December 4--7, 2018). An energy losing is calculated using the resolution model from BaBar experiment.

FARICH PID system

The FARICH PID system works using the results of the full GEANT4 simulation. The system output is the particle speed and number of photons.

Calorimeter (WIP)

Muon system

The muon system works using the results of a reconducted stand-alone simulation on G4BeamLine. The system is a cylinder of eight absorber and sensitive polystyrene layers. The absorber is iron.


SctParSim (Python)

How to run

Login to stark or proxima machine.

ssh stark -X
setupSCTAU; asetup SCTauSim,master,latest
mkdir workarea
cd workarea
mkdir run
cd run
cp /home/razuvaev/public/misc/pi_ms_f1_mppc2_px3_d200_mla4_graph2d.root .
cp /home/razuvaev/public/misc/gun1.cfg .
cp /home/razuvaev/public/misc/g4beamline_pi_plus_100k_parse.root .
cp /home/razuvaev/public/misc/g4beamline_mu_plus_100k_parse.root .
cp /home/whitem/public/misc/pi_p.root .
cp /home/whitem/public/misc/pi_m.root .
cp /home/whitem/public/misc/mu_p.root .
cp /home/whitem/public/misc/mu_m.root .
runparsim.py

Options

Option Run example Description
-b, --batch runparsim.py -b Turn on the batch mode. Suppress EventDisplay execution.
-c, --change runparsim.py -c my_cfg_file.dat Change some parameters of the detector.
-n, --neve runparsim.py -n 31415 The number of events to process.
-g, --gun runparsim.py -g Turn on the particle gun mode.
-ig, --input-gun runparsim.py -g -ig my_gun.dat Input particle gun configuration file.
-i, --input runparsim.py -i gen_dkpipi0.root Specify the input file.
-o, --output runparsim.py -o parsim_dkpipi0.root Specify the output file.
--profile runparsim.py --profile Turn on the cProfile to analyse the performance.

Event display

The event display has two projections: x-y and y-z. All detector subsystems are presented. Some of them overlay, especially PIDs, it is not important for parametric simulation, but let's study several options at once. All particles from AllGenParticles branch are presented at the plot by lines of different styles, colours and thicknesses. Somehow the line thickness corresponds to the particle mass, the wide line --- the more massive particle. Warm colours are devoted to positive charged particles and cold to negative ones. Also, particle lines are labeled.

The event display is switched on by default. To switch it off run simulation with -b option.


Detector configuration

The detector parameters can be changed via a configuration file my_cfg_file.dat placed in the main simulation folder. The file has a simple structure --- one parameter and its value(s) per line. A parameter's name and value should be separated by spaces. Arrays should be written in [] brackets. The values in arrays should be separated by commas. Empty lines and lines contained incorrectly parameter names are ignored.

In the example below the parameter at the first line and the second line is one number, while the parameter at the third line is an array.

trck.minPt 0.05
trck.corrMtx.pij -0.08
calo.resPar [0.167,0.0,0.011]

The parameters can be given in any order.

All detector parameters can be viewed in the configuration files:

Subsystem Congiguration file Name to change parameters
ASHIPH ashiphpars_std01.json ashiph1030
Calorimeter calopars_std01.json calo
FARICH farichpars_std01.json farich
FDIRC fdircpars_std01.json fdirc
Muon system muonpars_std01.json muon
ToF tofpars_std01.json tof
ToP toppars_std01.json top
Tracker trkpars_std01.json tracker

The detector subsystems sizes are stored in detlayout_std01.json. They can be changed in the same way.

Particle gun

Examples

Pictures

PAPAS (Old)

About papas, heppy et cetra

Particle propagation is done by geometry calculation. To valid the calculation several different cases were plotted.

Helix.
Helix.

Configure detector parameters

The detector parameters can be changed via a configuration file CTauPapas.cfg placed in the main papas simulation folder. The file has a simple structure --- one parameter and its value(s) per line. A parameter's name and value(s) should be separated by spaces. Empty lines and lines beginning with # are ignored.

In the example below the parameter at the first line is one number, while the parameter at the second line is an array.

ecal_emin_barrel 0.05

ecal_eres 1.34e-2 0.066e-2 0 0.82e-2

The parameters can be given in any order.


Configure detector parameters

The file ctau_input_sim.txt contains two lines. The first line is the path to a primary simulation file (see MC Data Sets page). The second line is an integer number of events to be processed.


How to run papas

Copy a directory with papas on stark the machine and go to this directory.

cd

cp -rf ~razuvaev/myheppy .

cd myheppy

There are a directory output for output files, detector configuration file CTauPapas.cfg, file ctau_input_sim.txt with a path to the file with primary generator events, and the folder heppy with heppy code itself. Let's go into it and tune environment.

cd heppy

source init.sh

Now it is time to run papas. You may be asked a question because the output directory is not empty. So just input y or clean the folder.

cd test

./heppy_loop.py ../../output/ ctau_cfg1.py

If it don't want to run try source ~razuvaev/.bashrc and source ../init.sh because it can be caused by the problem with environment variables.

When papas simulation has been done one need to present papas output to a suitable form and also add initial generator information.

cd ../../

./txt2tree.py

The output root tree is available in the file myheppy/output/txt2tree.root.

Output tree

The output tree contains branches which can be divided in several groups:

  • reconstructed particle parameters;
  • generated particle parameters;
  • generated vertices;
  • connection between reconstructed particles, generated particles and generated vertices.

The table below presents branches and description of their content.

Name Type Length Description
Reconstructed particles
n int 1 The number of reconstructed particles.
px float [] n The reconstructed particle momentum: x coordinate.
py float [] n The reconstructed particle momentum: y coordinate.
pz float [] n The reconstructed particle momentum: z coordinate.
Generated particles
n0 int 1 The number of generated particles.
px0 float [] n0 The generated particle momentum: x coordinate.
py0 float [] n0 The generated particle momentum: y coordinate.
pz0 float [] n0 The generated particle momentum: z coordinate.
Generated vertices
nv0 int 1 The number of generated vertices.
vx0 float [] nv0 The generated vertex: x coordinate.
vy0 float [] nv0 The generated vertex: y coordinate.
vz0 float [] nv0 The generated vertex: z coordinate.
Links
recgen int [] n Transform a reconstructed particle index to the generated particle index.
genver int [] n0 Transform a generated particle index to the generated vertex index.

Analysis example

Here a short analysis example of D^0 \to K_S^0 \pi^+ \pi^- is presented. The things are performed with PyROOT.

The data a taken from the available exclusive sample.

The code can be taken from github [1] or find at the stark cluster: /home/razuvaev/myheppy/search_dkspipi.py.

Personal tools