Use Analysis package

From Charm-Tau Detector
(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
 
= Introduction =
 
= Introduction =
  
The Analysis module implements all tools needed for:
+
The Analysis module implements tools needed for:
  
 
* Access the reconstructed final-state-particles
 
* Access the reconstructed final-state-particles
Line 46: Line 46:
  
 
= AuroraMaster interface =
 
= AuroraMaster interface =
 +
 +
An analysis procedure can be connected to the AuroraMaster instance with the <code>add_analysis</code> method. An <code>AuroraConfig</code> object with analysis configuration must be passed as the <code>cfg</code> parameter:
 +
 +
am = AuroraMaster('analysis', 'info')
 +
am.add_analysis(cfg=anaysisCfg)
 +
 +
An analysis configuration should contain three items
 +
 +
anaysisCfg = AuroraConfig({
 +
    'EventLoader' : [...],
 +
    'Combiners' : [...],
 +
    'Tuples' : [...]
 +
})
 +
 +
== EventLoader ==
 +
 +
The EventLoader algorithm specifies lists of the final-state-particles and corresponding cuts. Its configuration is a list of dictionaries of the following format:
 +
 +
[
 +
    {
 +
      'decstr': 'pi+ cc',
 +
      'cutstr': 'pt > 0.10',
 +
    },
 +
    {
 +
      'decstr': 'K+ cc',
 +
      'cutstr': 'pt > 0.10',
 +
    },
 +
    {
 +
      'decstr': 'pi+:lowpt cc',
 +
      'cutstr': 'pt < 0.20',
 +
    },
 +
    {
 +
      'decstr': 'gamma',
 +
      'cutstr': 'E > 0.07',
 +
    },
 +
    ...
 +
]
 +
 +
The <code>decstr</code> key correspond to the decay string. "cc" at the end of the decay string means that list of anti-particles will be created, too. The configuration above leads seven lists: "pi+", "pi-", "K+", "K-", "pi+:lowpt", "pi-:lowpt", and "gamma". These lists are available for the further analysis.
 +
 +
== Particle combiner ==
 +
 +
An analysis job usually includes several ParticleCombiner algorithms.
  
 
The simplest way to make an analysis joboption is using the AuroraMaster interface with the Analysis component.
 
The simplest way to make an analysis joboption is using the AuroraMaster interface with the Analysis component.

Revision as of 10:52, 10 February 2021

Contents

Introduction

The Analysis module implements tools needed for:

  • Access the reconstructed final-state-particles
  • Reconstruction arbitrary decay trees
  • Imposing selection criteria
  • Applying kinematic fit to the decay tree (TODO)
  • Saving a flat ntuple to a ROOT TTree for further analysis

The decay language

The Analysis package supports an easy-to-read string description of particle decays. The EvtGen particle naming scheme is used. The following strings are valid decay expressions:

"D0"
"D0 -> K- pi+"
"D0 -> [rho0 -> pi+ pi-] pi0"

A decay string may or may not contain the arrow and right-hand side. Spaces around the arrow are optional. Nested decays are expressed with square brackets.

A particle in the decay string can be labeled:

"pi+:lowpt"

"lowpt" is a label. Labels allow working with different particle lists of the same type. For example:

"D*+ -> [D0 -> K- pi+] pi+:lowpt"

A particle in the decay string can be selected using the "^" symbol:

"D0 -> ^K- ^pi+"

"K-" and "pi+" are selected here. We will consider the use cases for these features below.

The cuts language

The Analysis package contains large set of predefined variables. Most of these variables can be calculated for a given particle. Selection criteria are imposed with string expressions like:

* "M < 0.12"  # the mass less than 0.12 GeV
* "charge == 0" # zero electric charge
* "1.8 < M < 1.9"  # the mass is between 1.8 GeV and 1.9 GeV
* "charge == 0 and M < 0.12"
* "charge == 0 and [M < 0.12 or pt > 0.1]"

Square brackets are used to manage the order of logical operations. The following operators are available: ">", ">=", "<", "<=", "==", "!=", "and", "or".

AuroraMaster interface

An analysis procedure can be connected to the AuroraMaster instance with the add_analysis method. An AuroraConfig object with analysis configuration must be passed as the cfg parameter:

am = AuroraMaster('analysis', 'info')
am.add_analysis(cfg=anaysisCfg)

An analysis configuration should contain three items

anaysisCfg = AuroraConfig({
   'EventLoader' : [...],
   'Combiners' : [...],
   'Tuples' : [...]
})

EventLoader

The EventLoader algorithm specifies lists of the final-state-particles and corresponding cuts. Its configuration is a list of dictionaries of the following format:

[
   {
      'decstr': 'pi+ cc',
      'cutstr': 'pt > 0.10',
   },
   {
      'decstr': 'K+ cc',
      'cutstr': 'pt > 0.10',
   },
   {
      'decstr': 'pi+:lowpt cc',
      'cutstr': 'pt < 0.20',
   },
   {
      'decstr': 'gamma',
      'cutstr': 'E > 0.07',
   },
   ...
]

The decstr key correspond to the decay string. "cc" at the end of the decay string means that list of anti-particles will be created, too. The configuration above leads seven lists: "pi+", "pi-", "K+", "K-", "pi+:lowpt", "pi-:lowpt", and "gamma". These lists are available for the further analysis.

Particle combiner

An analysis job usually includes several ParticleCombiner algorithms.

The simplest way to make an analysis joboption is using the AuroraMaster interface with the Analysis component.

from AuroraMaster.auroramaster import AuroraMaster, AuroraConfig
from AuroraMaster.auroramaster import Analysis as A
am = AuroraMaster('analysis', 'info')
edminputCfg = AuroraConfig({
   'filename': './parsim.root',  # should be in your run directory
   'collections': ['Particles', 'allGenParticles'],
})
am.add_edmi(cfg=edminputCfg)
anaysisCfg = A.analysis(
   fsps=[
       A.fspList('pi+ cc'),
       A.fspList('K+ cc'),
   ],
   combiners=[
       A.combiner('Dkpi', 'D0 -> pi+ K-', '1.8 < M < 1.9'),
   ],
   tuples=[
       A.ntuple('tup', 'D0', 'tuple.root', [
           A.vars('root', ['momentumVars', 'E', 'M']),
           A.vars('D0 -> ^pi+ ^K-', ['momentumVars', 'pidVars', 'matchVars']),
       ]),
   ]
)
am.add_analysis(cfg=anaysisCfg)
am.run(evtmax=10**4)

Low level interface

Personal tools